Irons:
The revolutionary design of the LTDx Irons starts at the core. The construction features a multi-layer PWR-COR weighting system that lowers CG, and promotes maximum flexion of the body, sole and face for peak ball speed and distance.
PWR-COR TECHNOLOGY
A multi-layer PWR-COR weighting system features a steel core bar that is suspended within a polymer injected casing. The design promotes maximum flex of the body, face and sole at impact creating an elastic rebound effect that delivers powerful ball speed.
PWRSHELL FACE DESIGN
A forged face cup design increases ball speed across a wider area on the face.
SPEED TUNED WEIGHTING
An 8 gram toe weight enhances stability and can be adjusted down to 2g and up to 14g to dial in swing weighting for custom builds.
Hybrids:
The LTDx Hybrid is designed for pure distance, high launch, and straight ball flights.
PWR-COR TECHNOLOGY
A PWR-COR weighting system positions mass low and forward to combine low spin with faster ball speed for enhanced distance.
H.O.T FACE TECHNOLOGY
H.O.T (Highly Optimized Topology) Face Technology utilizes A.I. to design 15 HOT zones with strategic thicknesses to increase smash factor and ball speed across a wider area on the face.
PWRSHELL FACE CUP DESIGN
A forged face cup is designed to increase flex across the face and the sole for faster ball speed and higher launch.
BAFFLER RAILS
Two Baffler sole rails allow the club to glide effortlessly out of tight lies, thick rough, and even bunkers.
Specifications
| Club | Loft (*) | Head Volume | Lie Angle (*) | Offset (mm) | Length with Cobra Connect (") | Standard Length (") | Swing Weight |
| 5H | 24 | 119 | 59.50 | N/A | 39.50 | 39.25 | D1, C9, C8 |
| #6 | 23.5 | N/A | 64.00 | 3.9 | 38.00 | 37.75 | D0 (S), C9 (R), C8 (A) |
| #7 | 26.5 | N/A | 63.50 | 3.2 | 37.50 | 37.25 | D0 (S), C9 (R), C8 (A) |
| #8 | 31 | N/A | 64.00 | 2.6 | 37.00 | 36.75 | D0 (S), C9 (R), C8 (A) |
| #9 | 36 | N/A | 64.50 | 2.0 | 36.50 | 36.25 | D0 (S), C9 (R), C8 (A) |
| PW | 41.5 | N/A | 65.00 | 1.5 | 36.25 | 36.00 | D1 (S), D0 (R), C9 (A) |
| GW | 47.5 | N/A | 65.00 | 1.0 | 36.00 | 35.75 | D2 (S), D1 (R), D0 (A) |
KBS PGI
The KBS PGI graphite shafts provide the same dispersion and control as the KBS Tour Steel Shaft in a lighter weight and easier to swing graphite shaft profile.
| Model | Flex | Shaft Weight (g) | Kickpoint | Launch | Spin | Torque | Tip Diameter (") |
| KBS PGI 65 | Lite (Senior) | 65 | Low-Mid | Mid-High | Mid | 4.3 | .370 |
| KBS PGI 75 | Regular | 75 | Low-Mid | Mid-High | Mid | 4.3 | .370 |
| KBS PGI 85 | Stiff | 85 | Low-Mid | Mid-High | Mid | 4.3 | .370 |