OPTM X Driver
The OPTM X model delivers speed, accuracy and increased stability performance in a slightly larger footprint than the LS model to inspire more confidence over the ball.
Features & Benefits:
THE FIRST DRIVERS TO OPTIMIZE POI FOR STRAIGHTER MISS-HITS
Until now, MOI has been the primary measurement companies focus on optimizing club stability and forgiveness. Cobra is the first company to talk about a lesser-known measurement called POI, which accounts for club rotation across all three axes (MOI,Y (horizontal), MOI,X (vertical) and MOI,Z (toe up or down) that occurs during off-center hits). The OPTM drivers are the first to optimize both MOI and POI through strategic weight placement & shaping to create a super driver - one that dramatically reduces gear effect to deliver up to 23% tighter dispersion for longer and straighter off-center shots.
X IMPROVEMENTS VS LAST GEN
By optimizing MOI and POI through shaping and strategic mass placement, the OPTM X model perfectly balances accuracy and forgiveness. Using supercomputing and A.I. methods, Cobra engineers have created a design harmony that is hard to achieve by maximizing MOI and reducing POI (by over 50%). The result is a dramatic reduction in side spin on off-center hits for straighter and more accurate drives that start and end up closer to your target line.
RESHAPED FOR FORGIVENESS
To optimize MOI and POI, the mass is distributed more symmetrically around the center of gravity and across the 3 key axes and tightened around the CG to minimize the club's diagonal resistance to rotation. Using A.I. driven simulation tools, Cobra engineers have studied millions of impact locations to gain an expert understanding of gear effect and how to determine the optimal location of the metal/mass, and movable weights in each model.
FUTUREFIT33 ADJUSTABLE HOSEL
FutureFit33 ™ features 33 unique loft & lie settings to optimize your ball flight, minimize your misses, and maximize your distance. Loft & lie can be adjusted by +/- 2 degrees in any direction, allowing for the ultimate fine-tuned fitting customization, while the innovative SMARTPAD® design enables the face angle to remain square regardless of the setting.
ADJUSTABLE WEIGHTING
The OPTM X driver features an advanced descending weight system with 2 adjustable weights (11g, 3g) that can each be moved in the back (neutral flight), or toe (fade-biased flight) positions to tune trajectory control.
H.O.T. FACE TECHNOLOGY
A forged face insert with H.O.T. Face technology delivers improved face flex for more robust distance and ball speeds on and around the center of the face.
| Shape/Profile | Launch | Spin | Forgiveness | ||
| Oversize | High | Mid-Low | Extreme |
| Loft | FF33 Loft Range | Lie | Volume | Lie Angle Range | STD Length |
| 9.0 | 7.0-11 | 57 | 460 | 55-59 | 45.50 |
| 10.5 | 8.5-12.5 | 58 | 460 | 56-60 | 45.50 |
SHAFT SPECIFICATIONS
| Brand | Model | Weight/Flex |
| MCA | Kai'li Dark Waves White 60 | X - 69.5g, S - 68g |
| MCA | Kai'li Dark Waves Blue 60 | S - 66.5g, R - 64.5g |
| MCA | Kai'li Dark Waves Red 50 | R - 53.5g, A - 51.5g |
| Project X | Denali Black Frost 60 | S - 67g |
| Project X | Denali Blue Frost CB 60 | S - 67g, R - 66g |
GRIP SPECIFICATIONS
| Brand | Model | Weight |
| SuperStroke | Crossline Black STD | 60R |
⚠️WARNING: Products sold on this website may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65warnings.ca.gov